• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Pre-welded Wag Aero fuselage for Acrosport 1 information.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jgross

DR-107 (formerly jimrgross)
Joined
Apr 28, 2012
Messages
122
Reaction score
3
Does anyone know if the pre-welded fuselages from Wag Aero were internally oiled for corrosion protection?
This would have been most likely 1984 or 1985. Airworthiness certificate was dated 1986.

Any help is appreciated.

Jim



Sent from my iPad using Biplane Forum
 

Latest posts

Back
Top