• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Ragwing RW26 Special II (two seater)

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

flyingb

Member
Joined
May 16, 2007
Messages
5
Reaction score
0
I ordered the plans for the RW26 Special II.


Looking at the Ragwing website I can see that the RW-2 (single seat)canbe built witha steel (4130) fuselage.


I also read somewhere that the two aircrafts are very similar.


Now, on the Ragwing website I cannot see the option to build the Special II with a 4130 fuselage.


Can anyone confirm that such an option is not available for the RW26 Special II?


The reason whyI'm asking: I live in Italy and it's easier to get 4130 than Sitka Spruce, here. So I can have someone mail me the wood in reasonable sizes (for the wing ribs, etc), but when it comes to the spars... it would be difficult (and really expensive) having the longer pieces mailed from the USA to Italy. I could as well get the 4130 here and become proficient in gas welding before I'll face the fuselage stage (or having someone smarter doing it for me). I'd have to deal with sizes (here in mm, there in fractions ofinches) but that would be definitely aneasier thing to get rid of.


Ciao!
Cristiano.
(Roma - ITALY)
 

Latest posts

Back
Top