• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Thread chasers for aircraft.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Robin Tripp

Well-Known Member
Lifetime Supporter
Joined
Sep 20, 2006
Messages
385
Reaction score
195
Location
CTF4
We don’t seem to have a tool section so I will post it here. I failed to plug the threads for the nut plates on my fuselage when I painted it. I want to use thread chasers to clean them out. I found that the threads taper to help the screw lock in. A conventional thread chaser will destroy that. I can’t seem to find an aircraft specific set that takes this into account. Can you guys offer any insight or sources?
 

Latest posts

Back
Top