• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Rudder Horn
Jerry

Rudder Horn

Pattern glued to the 4130 steel (created in DeltaCAD.) Just starting to rough cut it before grinding it and filing it to size. I'll finish up with sanding all the edges smooth and the surface of all scratches. NOTE: This is the FIRST one I made... you need to leave the ears of the piece longer so that when you bend them they don't twist. It's also easier to bend them when you leave extra material on the end.
There are no comments to display.

Media information

Album
Rudder Horn
Added by
Jerry
Date added
View count
949
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top