- Joined
- Sep 6, 2007
- Messages
- 3,290
- Reaction score
- 2,254
Fabed the coil springs from Wag Aero today and came up with problem at first fitting. The long tube is the smaller one and the one at the top is 1" that has to fit in a 7/8" space...so cut and flattened the end to fit, no info on where to locate the spring so i decided 3" from center of bolt to edge of collar that left enough room to weld finger strap. Used 32" center to center of bolts which puts lots of camber in the wheels with it off the ground.
Please comment but not so much that i have to scrap them and order another pair at $270.
Dennis in Chicago
Please comment but not so much that i have to scrap them and order another pair at $270.
Dennis in Chicago