- Joined
- Jun 27, 2007
- Messages
- 2,338
- Reaction score
- 985
https://picasaweb.google.com/109271578379288810018/Acrosport?authkey=Gv1sRgCJuWnYqI05qxTw
you can zoom in a bit on those photos. Let me know if you want more on the welds its a really good start on an aircraft. There is probably $10,000 (retail) worth of stuff to be had here if not more. asking $5,000
Fuselage stuff and components
Fuselage Tig welded although not the most pristine welds there is some surface rust but no piting
Dynafocal engine mount ring
Fuse on gear with springs in a box
Horizontal Tail tacked no elevators
no vertical tail or rudder
Enough sheet metal to skin it
spare tube and what looks like a 10-12ft piece of streamline for the I-struts (this stuff retails for $35 per foot)
streamline for the cabanes
1 Cabane is in the jig but not welded
Spare sheet metal with surface rust
Flop tube
Brand new pro welded Fuel tank
No fittings besides the gear are installed (sheet metal hangars wings fittings fuel tank fittings ect.
Looks like a lot of the AN bolt hardware and nuts a really good start on Aircraft hardware if not a complete kit.
Gear
6x6.00 airhawks
6x6.00 wheels and brakes (looks like the wheels were painted and someone put stripper on them all peeled up)
Brand new Matco MC-4 master cylinders
Brand new Matco Brake reservoir and nylon tube and fitting kit
Brand new Matco Parking brake master cylinder
Maule tail wheel with leaf spring
Wings and hardware (Controls and Components)
wing center section mostly finished but no varnish bow there not installed
Wings are varnished and drag wires are tight tips arn't finished no fairings
All wing hardware is chromated
Raven Pitot Static tube
Wing to fuselage fittings some pre-bent ready for welding
Aluminum torque tube bearings
Bag full of heim spherical rod ends looks like 20+
Bag full of Fafnir KP 4 bearings in boxes
AN threaded tube insert rod ends
Large AN forks for Cabanes
Trailing edge for ailerons
Ailerons are not built looks like several ribs were started
Two quality throttle/mixture quadrants
2- 90 deg bellcrank with bearings in cages
2 - mid wing idlers with bearings in cages
Asking $5,000 (negotiable) no shipping must pick up at 2W6 (Lexington Park, MD 20653) PM me if you need more info.
you can zoom in a bit on those photos. Let me know if you want more on the welds its a really good start on an aircraft. There is probably $10,000 (retail) worth of stuff to be had here if not more. asking $5,000
Fuselage stuff and components
Fuselage Tig welded although not the most pristine welds there is some surface rust but no piting
Dynafocal engine mount ring
Fuse on gear with springs in a box
Horizontal Tail tacked no elevators
no vertical tail or rudder
Enough sheet metal to skin it
spare tube and what looks like a 10-12ft piece of streamline for the I-struts (this stuff retails for $35 per foot)
streamline for the cabanes
1 Cabane is in the jig but not welded
Spare sheet metal with surface rust
Flop tube
Brand new pro welded Fuel tank
No fittings besides the gear are installed (sheet metal hangars wings fittings fuel tank fittings ect.
Looks like a lot of the AN bolt hardware and nuts a really good start on Aircraft hardware if not a complete kit.
Gear
6x6.00 airhawks
6x6.00 wheels and brakes (looks like the wheels were painted and someone put stripper on them all peeled up)
Brand new Matco MC-4 master cylinders
Brand new Matco Brake reservoir and nylon tube and fitting kit
Brand new Matco Parking brake master cylinder
Maule tail wheel with leaf spring
Wings and hardware (Controls and Components)
wing center section mostly finished but no varnish bow there not installed
Wings are varnished and drag wires are tight tips arn't finished no fairings
All wing hardware is chromated
Raven Pitot Static tube
Wing to fuselage fittings some pre-bent ready for welding
Aluminum torque tube bearings
Bag full of heim spherical rod ends looks like 20+
Bag full of Fafnir KP 4 bearings in boxes
AN threaded tube insert rod ends
Large AN forks for Cabanes
Trailing edge for ailerons
Ailerons are not built looks like several ribs were started
Two quality throttle/mixture quadrants
2- 90 deg bellcrank with bearings in cages
2 - mid wing idlers with bearings in cages
Asking $5,000 (negotiable) no shipping must pick up at 2W6 (Lexington Park, MD 20653) PM me if you need more info.
Last edited:
