gerryy
Member
- Joined
- Aug 25, 2010
- Messages
- 5
- Reaction score
- 1
I thought I would share my most recent project. it is an RC 1/3-scale Fokker Dr.1 Triplane. 94 inch span, 80cc twin cylinder gas engine, weighing in at approx. 40 pounds. Covered with Stits fabric and finish will be PolyTone paint.
Have about 500 hours into the project and I just finished all the covering. Will start the painting soon!
The model is built from a Balsa USA kit.
Have about 500 hours into the project and I just finished all the covering. Will start the painting soon!
The model is built from a Balsa USA kit.