- Joined
- Nov 2, 2016
- Messages
- 387
- Reaction score
- 292
I'm looking to fabricate one of these for my fuel tank. If you have any good pictures of one that is out of the tank. Simple enough to make, but I'd like to see a few to get ideas after seeing the guts. I couldn't find much poking around. Looks like a Model A float is a pretty common part. They have new modern ones that don't go bad.
Ideally, A print with some measurements and thicknesses would be great.
Thanks
Ideally, A print with some measurements and thicknesses would be great.
Thanks