• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Mixture control bracket

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Aerobaticorsu

Registered Users
Joined
Jun 30, 2014
Messages
309
Reaction score
42
Hello everybody,


I hope that everyone is going well with this virus....
I have swapped my old exhaust system on my S-2A with a crossover exhaust.
I enjoy the extra horses !!! After a 200m takeoff run, she climbs on a 45° until 600ft and can keep her with that attitude, hanging on the prop at 30mph

However, I have burnt the mixture cable...
I have just bought a vernier control, but (there’s always a but...) the diameter on the bracket is far bigger than the stock control.

Do you know if the latest Pitts have a vernier control and thus an adequate bracket?
Many thanks

Fly safe, and take care
 

Latest posts

Back
Top