• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Moving a hole center

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

CATIAGUY

Well-Known Member
*
Joined
Mar 19, 2013
Messages
170
Reaction score
148
I need to move a hole that is misdrilled. The hole C/L needs to move .030. The current hole dia is #30, my finished and relocated hole final diameter will be .1875 so I have enough material to do it and the hole will clean up. Just don't know how to do it. The material is AL plate, .50 thick. I have looked at center drills as an option, but I need someone with a machining background to advise. Trying to do it on a drill press but I have access to a mill if necessary.
Thanks
Gerry
 

Latest posts

Back
Top