New posts

The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.

Click here to register and become a Subscribing Member

Pitts wing tie down brackets (TSO'd for certified planes)

Thread starter acropilotbret
Start date May 23, 2015

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

acropilotbret

Senior Member

Lifetime Supporter

May 23, 2015

For those with certified aircraft and for those not interesting in make a set of your own. I ran in to Bill Finigan (DentAir) today and he told me that he now has a TSO for underwing tie down brackets. These brackets attached as the washer under the wing forward spar I-strut bolt. Simply removing the bolt (use 1/4 drift pin to hold the place) and your all done. So if you your are going to Oshkosh and need a set give him a call. I think he told me $55 each un-painted and $60 each painted. Call him for details. He told me he was going put info on the exploder as well.

Dent Air Ltd.
6 Romar Dr
Annapolis, MD USA 21403
(410) 956-0047

You must log in or register to reply here.