rod end extensions

[larryM]

I need to extend the range of my aileron push tube end bearing about 1/4" or so to get the ailerons level and have enough thread left into the rod end. Is there an adaptor or extension of some sort like an AN490 threaded rod end, except I need internal female 5/16-24 and external male 15/16-24 for the heim bearing. Unfortunately, my control rod was made as one long piece and only the stick end has any adjustment.
At this point, I do not want to make a new rod. It has been flying without enough thread in the bearing for 1000 hrs, before I found it!

Thanks,
larry