• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $29.95/year to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).

Selling two Skybolt projects

rarossi

Member
Joined
Sep 25, 2014
Messages
16
Reaction score
0
My biplane brothers. I have reached a point where I would rather be flying than building so I bought a Clip Wing Cub and I am selling both my Skybolt projects.

Project 1) A previously flying IO-540 Skybolt, N559P, that has been repaired and recovered. Hartzell C2YK, Lightspeed, Christen inverted oil, EIS monitor, Hooker harnesses, Steen tail wheel, baxter quadrants, many new parts, and all parts and bolts needed to assemble. Fuselage and tail feathers primed, wings need primed. Needs paint and assembly to be a flying experimental aircraft. $25000

Project 2) An original plans Skybolt with all the welded parts and a beautiful set of stick built three hinge lower wings and flying wires. $7500

I will consider separating the airframes, wings, and engine/prop.

Please read detailed description and see numerous photos at: https://www.dropbox.com/sh/171dvxsxog2t5k7/AAAdcfuOMp341eyfMDUYt1-ba?dl=0
 

Smithacb

Well-Known Member
Joined
Dec 8, 2013
Messages
109
Reaction score
6
Hello,
If you would, how much for the complete top wing & flying wires?
Are they flying & landing wires (main wing) & the tail plane bracing wires (all full set)?

Thx for answering my question.

ATB & good luck

Al
 

rarossi

Member
Joined
Sep 25, 2014
Messages
16
Reaction score
0
I'm really not interested in selling off those parts separately. That would leave me with a very odd set of remaining parts. Please send me a private message or email me at [email protected]. I have a idea that may work for you.
 
Last edited:

Latest posts

Top