- Joined
- Sep 6, 2007
- Messages
- 3,290
- Reaction score
- 2,253
sheet 18 has an error at D5, the 1 1/2" dimension should be 1 1/4" + 7/16"=1 11/16" (see side view). i found this out after cutting and bending and drilling the fittings. Also had interference with trailing edge at lower wing aileron well and it looks like the fwd edge of the strut may catch on the upper wing aileron well. The 46 1/4" overall length and 11 deg. angle
worked well.
See photos.
Anyone else verify the above?
Dennis in Chicago
worked well.
See photos.
Anyone else verify the above?
Dennis in Chicago