Hello All:
I'm working on laying out the bottom wing spars for my S1C project. I'm working from Steen Aero Lab Plans. These plans leave a lot to be desired in many areas this one included. The plan for the outboard tip of the lower wing front spar shows a dimension of 1 3/8" high. I know this isn't right. It should be 3/4" high the same as the height of the wing tip bow, just like all the other spar tips. Looking at the plan, it apppears that possibly the top edge of the wing tip bow should line up with the centerline of the spar face. If anyone can confirm this I would be much appreciated. If the top edge of the wing tip bow should aline in a different location I'd appreciate knowing that. If I know where the top edge of the wing tip bow should align on the spar face I can figure the rest of it out.
Thanks in advance
Matt
I'm working on laying out the bottom wing spars for my S1C project. I'm working from Steen Aero Lab Plans. These plans leave a lot to be desired in many areas this one included. The plan for the outboard tip of the lower wing front spar shows a dimension of 1 3/8" high. I know this isn't right. It should be 3/4" high the same as the height of the wing tip bow, just like all the other spar tips. Looking at the plan, it apppears that possibly the top edge of the wing tip bow should line up with the centerline of the spar face. If anyone can confirm this I would be much appreciated. If the top edge of the wing tip bow should aline in a different location I'd appreciate knowing that. If I know where the top edge of the wing tip bow should align on the spar face I can figure the rest of it out.
Thanks in advance
Matt