Still need help!

[Wurzel]

Hi there, I posted a thread asking for help with a canopy, but didn't get much response. I've attached a photo of what I've got; it's the type that slides back 6" then hinges open along one side. The canopy hinge point is fitted with a roller bearing to allow it to slide along the steel rods as well as pivot open ( see second photo) . What I need to know is how to attach the steel rods to the fuselage. I know there are quite a few Acrodusters out there using this Spruce canopy, so would really appreciate some drawings or photos. Huge thanks,



Sent from my iPad using Biplane Forum

 

[race38]

 

[MTChris]

 

[Starduster2]

 

[smizo]

 

[planebuilder]

 

[Wurzel]

 

[Starduster2]