• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Three in one Gauge

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bjboyle

Member
Joined
Mar 20, 2009
Messages
10
Reaction score
0


I'm redoing the panel on an S1S and put in a newly overhauled AN5773-T2 three in one gauge (oil temp, pressure and fuel pressure). As you might expect I paid no attention to the wiring when the old gauge was removed. Any one out there have the wiring diagram for the cannon plugs?
thanks,
B. J. Boyle
 

Latest posts

Back
Top