• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Wing smoke tank flop tube

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

4-Shipp

Well-Known Member
Supporting Member
*
Joined
Oct 14, 2013
Messages
403
Reaction score
351
79B19290-64FF-4A0F-B885-0A1046794F94.jpeg


This is the plumbing set up we have on our wing tank. The AN fitting that screws into the tank is flush with the inside of the tank. We would like to install a flop tube for smoke. If anyone can provide a way forward and parts list to add a flop tube to this setup it would be greatly appreciated,

Thank you,

Bruce
 

Latest posts

Back
Top