- Joined
- Nov 14, 2007
- Messages
- 3,391
- Reaction score
- 3,201
Robert Mesmer said: ↑I need information on an acroduster- parts needed are the center section top wing leading edge and a tail wheel spring?
Robert most Acroduster center sections are covered with .016 2024 -T3 aluminum, and could be one piece with a straight L.E. or two pieces if it is built to accommodate the 6 degee sweep back.
As for the tail wheel spring, just what do you have? The conventional three piece 1/4" X 1 1/2" wide spring is what most were equipped with, please post some pictures of both so we van better assist you. Dave
Robert most Acroduster center sections are covered with .016 2024 -T3 aluminum, and could be one piece with a straight L.E. or two pieces if it is built to accommodate the 6 degee sweep back.
As for the tail wheel spring, just what do you have? The conventional three piece 1/4" X 1 1/2" wide spring is what most were equipped with, please post some pictures of both so we van better assist you. Dave
