• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



acrosport 2 die spring question

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

block

Active Member
Joined
Oct 27, 2010
Messages
44
Reaction score
14
i have a acrosport 2 with the die spring leg setup,i fly out of a 2000 ft grass strip that is in average cond,my landings are not always the best and it seems like the springs bottom out every now and then,they have about 2 inches of travel,i installed solid plugs in the upper end already ,question is should i remake the lower legs with more travel and 10 inch springs instead of the 6 inch i have now,or do i go to the bungee setup with more travel,or any other ideas
 

Latest posts

Back
Top