John Burnett
Well-Known Member
- Joined
- Oct 8, 2006
- Messages
- 128
- Reaction score
- 0
On sheet 10 of my plans in the upper left hand corner
A "L" shaped bracket is shown with a 2" dimension aligned
with the centers of 2 holes. To the left of that a 2" dimension
is shown vertically also, I think, between these same 2 holes.
Which one of these dimensions, if either, is correct?
I checked in the errata encyclopedia and the only change
that I see is the 3/4 to 3/8 offset modification.
Thanks,
John burnett
A "L" shaped bracket is shown with a 2" dimension aligned
with the centers of 2 holes. To the left of that a 2" dimension
is shown vertically also, I think, between these same 2 holes.
Which one of these dimensions, if either, is correct?
I checked in the errata encyclopedia and the only change
that I see is the 3/4 to 3/8 offset modification.
Thanks,
John burnett