Reviewing the drawings I see that everything BUT the nose rib and front vertical strip, for the front spar, are 1/2" thick. These two pieces are only 1/4" thick.
It then says to cover both sides with 1/16" ply.
Would there be any reason that I couldn't make these other two pieces 1/2" thick ?
Maybethe 1/4"call outs area mistake on the drawings ?
It then says to cover both sides with 1/16" ply.
Would there be any reason that I couldn't make these other two pieces 1/2" thick ?
Maybethe 1/4"call outs area mistake on the drawings ?