• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Drilling Speeds

Shop deals on ebay
shop deals on amazon
Advertise with us
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
S

scottly

Well-Known Member
*
Joined
Sep 13, 2006
Messages
1,639
Reaction score
4
<TABLE style="WIDTH: 609pt; BORDER-COLLAPSE: collapse" cellSpacing=0 cellPadding=0 width=810 border=0 x:str>
<COLGROUP>
<COL style="WIDTH: 95pt; mso-width-source: userset; mso-width-alt: 4608" width=126>
<COL style="WIDTH: 107pt; mso-width-source: userset; mso-width-alt: 5193" width=142>
<COL style="WIDTH: 121pt; mso-width-source: userset; mso-width-alt: 5888" width=161>
<COL style="WIDTH: 113pt; mso-width-source: userset; mso-width-alt: 5485" width=150>
<COL style="WIDTH: 84pt; mso-width-source: userset; mso-width-alt: 4096" width=112>
<COL style="WIDTH: 89pt; mso-width-source: userset; mso-width-alt: 4352" width=119>

<TR style="HEIGHT: 45pt; mso-height-source: userset" height=60>
<TD =xl22 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: black 0.5pt solid; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: black 0.5pt solid; HEIGHT: 60pt; : yellow" width=126 height=80 rowSpan=2>Material
<TD =xl22 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: black 0.5pt solid; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : yellow" width=142>Hardness,
<TD =xl22 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: black 0.5pt solid; BORDER-LEFT: black 0.5pt solid; WIDTH: 121pt; BORDER-BOTTOM: black 0.5pt solid; : yellow" width=161 rowSpan=2>Cutting Speed, fpm
<TD =xl22 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: black 0.5pt solid; BORDER-LEFT: black 0.5pt solid; WIDTH: 113pt; BORDER-BOTTOM: black 0.5pt solid; : yellow" width=150 rowSpan=2>Material
<TD =xl22 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: black 0.5pt solid; BORDER-LEFT: black 0.5pt solid; WIDTH: 84pt; BORDER-BOTTOM: black 0.5pt solid; : yellow" width=112 rowSpan=2>Hardness, Bhn
<TD =xl22 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: black 0.5pt solid; BORDER-LEFT: black 0.5pt solid; WIDTH: 89pt; BORDER-BOTTOM: black 0.5pt solid; : yellow" width=119 rowSpan=2>Cutting Speed, fpm
<TR style="HEIGHT: 15pt" height=20>
<TD =xl23 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: black 0.5pt solid; HEIGHT: 15pt; : yellow" width=142 height=20>Bhn
<TR style="HEIGHT: 38.25pt" height=51>
<TD =xl24 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: black; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 38.25pt; : transparent" width=126 height=51>Plain Carbon Steels
<TD =xl29 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: black; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>
<TD =xl29 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: black; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>
<TD =xl24 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: black; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Stainless Steels (Cont.)
<TD =xl29 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: black; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>
<TD =xl29 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: black; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>
<TR style="HEIGHT: 127.5pt" height=170>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 127.5pt; : transparent" width=126 height=170>AISI–1019, 1020, 1030, 1040, 1050, 1060, 1070, 1080, 1090
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>120–150
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>80–120
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Cold-Drawn
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>225–275
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>60–90
<TR style="HEIGHT: 12.75pt" height=17>
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 12.75pt; : transparent" width=126 height=17>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>150–170
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>70–90
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Ferritic
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>135–185
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>100–120
<TR style="HEIGHT: 25.5pt" height=34>
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 25.5pt; : transparent" width=126 height=34>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>170–190
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>60–80
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Martensitic
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>
<TR style="HEIGHT: 25.5pt" height=34>
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 25.5pt; : transparent" width=126 height=34>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>190–220
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>50–70
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Annealed
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>135–185
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>100–130
<TR style="HEIGHT: 25.5pt" height=34>
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 25.5pt; : transparent" width=126 height=34>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>220–280
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>40–50
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Cold-Drawn
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>185–240
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>90–120
<TR style="HEIGHT: 51pt" height=68>
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 51pt; : transparent" width=126 height=68>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>280–350
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>30–40
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Quenched &amp; Tempered
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>275–325
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>50–60
<TR style="HEIGHT: 25.5pt" height=34>
<TD =xl27 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 25.5pt; : transparent" width=126 height=34>Alloy Steels
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>350–425
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>15–30
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>375–425
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>30–40
<TR style="HEIGHT: 51pt" height=68>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 51pt; : transparent" width=126 height=68>AISI-1320, 2317, 2515,
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>
<TR style="HEIGHT: 51pt" height=68>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 51pt; : transparent" width=126 height=68>3120, 3316, 4012, 4020,
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>
<TD =xl27 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Tool Steels
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>
<TR style="HEIGHT: 51pt" height=68>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 51pt; : transparent" width=126 height=68>4120, 4128, 4320, 4620,
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>125–175
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>60–80
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Water Hardening
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>150–250
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>70–80
<TR style="HEIGHT: 51pt" height=68>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 51pt; : transparent" width=126 height=68>4720, 4820, 5020, 5120,
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>175–225
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>50–70
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Cold Work
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>200–250
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>20–40
<TR style="HEIGHT: 51pt" height=68>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 51pt; : transparent" width=126 height=68>6120, 6325, 6415, 8620,
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>225–275
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>45–60
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Shock Resisting
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>175–225
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>40–50
<TR style="HEIGHT: 25.5pt" height=34>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 25.5pt; : transparent" width=126 height=34>8720, 9315
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>275–325
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>35–55
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Mold
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>100–150
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>60–70
<TR style="HEIGHT: 12.75pt" height=17>
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 12.75pt; : transparent" width=126 height=17>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>325–375
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>30–40
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>150–200
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>50–60
<TR style="HEIGHT: 38.25pt" height=51>
<TD =xl27 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 38.25pt; : transparent" width=126 height=51>Alloy Steels
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>375–425
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>15–30
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>High-Speed Steel
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>200–250
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>30–40
<TR style="HEIGHT: 51pt" height=68>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 51pt; : transparent" width=126 height=68>AISI-1330, 1340, 2330,
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>250-275
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>15–30
<TR style="HEIGHT: 51pt" height=68>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 51pt; : transparent" width=126 height=68>2340, 3130, 3140, 3150,
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>
<TD =xl27 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Gray Cast-Iron
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>
<TR style="HEIGHT: 51pt" height=68>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 51pt; : transparent" width=126 height=68>4030, 4063, 4130, 4140,
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>175–225
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>50–70
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>110–140
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>90–140
<TR style="HEIGHT: 51pt" height=68>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 51pt; : transparent" width=126 height=68>4150, 4340, 4640, 5130,
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>225–275
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>40–60
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>150–190
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>80–100
<TR style="HEIGHT: 51pt" height=68>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 51pt; : transparent" width=126 height=68>5140, 5160, 52100, 6150,
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>275–325
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>30–50
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>190–220
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>60–80
<TR style="HEIGHT: 51pt" height=68>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 51pt; : transparent" width=126 height=68>6180, 6240, 6290, 6340,
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>325–375
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>25–40
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>220–260
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>50–70
<TR style="HEIGHT: 51pt" height=68>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 51pt; : transparent" width=126 height=68>6380, 8640, 8660, 8740,
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>375–425
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>15–30
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>260–320
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>30–40
<TR style="HEIGHT: 51pt" height=68>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 51pt; : transparent" width=126 height=68>9260, 9445, 9840, 9850
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>
<TR style="HEIGHT: 12.75pt" height=17>
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 12.75pt; : transparent" width=126 height=17>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>
<TR style="HEIGHT: 25.5pt" height=34>
<TD =xl27 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 25.5pt; : transparent" width=126 height=34>Stainless Steels
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>
<TD =xl27 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Malleable Iron
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>
<TR style="HEIGHT: 38.25pt" height=51>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 38.25pt; : transparent" width=126 height=51>Standard Grades
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Ferritic
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>110–160
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>120–140
<TR style="HEIGHT: 25.5pt" height=34>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 25.5pt; : transparent" width=126 height=34>Austenitic
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Pearlitic
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>160–200
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>90–110
<TR style="HEIGHT: 25.5pt" height=34>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 25.5pt; : transparent" width=126 height=34>Annealed
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>200–240
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>60–90
<TR style="HEIGHT: 25.5pt" height=34>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 25.5pt; : transparent" width=126 height=34>Cold-Drawn
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>240–280
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>50–60
<TR style="HEIGHT: 12.75pt" height=17>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 12.75pt; : transparent" width=126 height=17>Ferritic
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>135–185
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>40–50
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>
<TR style="HEIGHT: 25.5pt" height=34>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 25.5pt; : transparent" width=126 height=34>Martensitic
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>225–275
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>30–40
<TD =xl27 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Aluminum Alloys
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>
<TR style="HEIGHT: 38.25pt" height=51>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 38.25pt; : transparent" width=126 height=51>Annealed
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>135–185
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>50–60
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Cast-Nonheat Treated
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>200–300
<TR style="HEIGHT: 38.25pt" height=51>
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 38.25pt; : transparent" width=126 height=51>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Cast-Heat Treated
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>150–250
<TR style="HEIGHT: 51pt" height=68>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 51pt; : transparent" width=126 height=68>Quenched &amp; Tempered
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>135–175
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>55–70
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Wrought-Cold Drawn
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>150–300
<TR style="HEIGHT: 38.25pt" height=51>
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 38.25pt; : transparent" width=126 height=51>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>175–225
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>50–60
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Wrought-Heat Treated
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>140–300
<TR style="HEIGHT: 51pt" height=68>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 51pt; : transparent" width=126 height=68>Free Machining Grades
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>275–325
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>30–40
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>
<TR style="HEIGHT: 51pt" height=68>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 51pt; : transparent" width=126 height=68>Austenitic
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>375–425
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>15–30
<TD =xl27 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Brass &amp; Bronze (Ordinary)
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>
<TR style="HEIGHT: 25.5pt" height=34>
<TD =xl25 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 25.5pt; : transparent" width=126 height=34>Annealed
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>
<TD =xl30 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>150–300
<TR style="HEIGHT: 51pt" height=68>
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: #d4d0c8; HEIGHT: 51pt; : transparent" width=126 height=68>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>
<TD =xl27 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Bronze (High Strength)
<TD =xl26 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=112>
<TD =xl31 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=119>
<TR style="HEIGHT: 12.75pt" height=17>
<TD =xl28 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black 0.5pt solid; WIDTH: 95pt; BORDER-BOTTOM: black 0.5pt solid; HEIGHT: 12.75pt; : transparent" width=126 height=17>
<TD =xl32 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 107pt; BORDER-BOTTOM: black 0.5pt solid; : transparent" width=142>135–185
<TD =xl32 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 121pt; BORDER-BOTTOM: black 0.5pt solid; : transparent" width=161>80–100
<TD =xl28 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 113pt; BORDER-BOTTOM: black 0.5pt solid; : transparent" width=150>
<TD =xl28 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 84pt; BORDER-BOTTOM: black 0.5pt solid; : transparent" width=112>
<TD =xl32 style="BORDER-RIGHT: black 0.5pt solid; BORDER-TOP: #d4d0c8; BORDER-LEFT: black; WIDTH: 89pt; BORDER-BOTTOM: black 0.5pt solid; : transparent" width=119>30–100
<TR style="HEIGHT: 12.75pt" height=17>
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; HEIGHT: 12.75pt; : transparent" height=17>
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; : transparent">
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; : transparent">
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; : transparent">
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; : transparent">
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; : transparent">
<TR style="HEIGHT: 0.75pt; mso-height-source: userset" height=1>
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; HEIGHT: 0.75pt; : transparent" height=1>
<TD =xl34 style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; WIDTH: 107pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=142>
<TD =xl34 style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; WIDTH: 121pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=161>
<TD =xl34 style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; : transparent">
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; : transparent">
<TR style="HEIGHT: 30pt; mso-height-source: userset" height=40>
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; HEIGHT: 30pt; : transparent" height=40>
<TD =xl33 style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; WIDTH: 228pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=303 colSpan=2>Cutting speed (CS) X 4
<TD =xl36 style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; WIDTH: 113pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=150>Equals RPM For Drilling
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; : transparent">
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; : transparent">
<TR style="HEIGHT: 22.5pt; mso-height-source: userset" height=30>
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; HEIGHT: 22.5pt; : transparent" height=30>
<TD =xl35 style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; WIDTH: 228pt; BORDER-BOTTOM: #d4d0c8; : transparent" width=303 colSpan=2>Diameter of cutter (D)
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; : transparent">
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; : transparent">
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; : transparent">
<TR style="HEIGHT: 12.75pt" height=17>
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; HEIGHT: 12.75pt; : transparent" height=17>
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; : transparent">
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; : transparent">
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; : transparent">
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; : transparent">
<TD style="BORDER-RIGHT: #d4d0c8; BORDER-TOP: #d4d0c8; BORDER-LEFT: #d4d0c8; BORDER-BOTTOM: #d4d0c8; : transparent">
 
You must log in or register to reply here.

Similar threads

H
SA300 Weight and Balance
2
Replies
30
Views
7K
harleygaz
H
P
Basic Aerobatics
Replies
4
Views
2K
PeterL
P
DaveS1C
N4YW - Franklin 130HP Pitts Numbers
Replies
3
Views
2K
DaveS1C
DaveS1C
MNForrest
B&C Alternator rebuild?
Replies
1
Views
2K
Neil
Neil
Pitts6J
weight loss
Replies
14
Views
2K
macwolf
macwolf

Latest posts

Back
Top