- Joined
- Dec 18, 2007
- Messages
- 510
- Reaction score
- 249
I have a Lycoming I0360 A1B 200hp engine and I have had two engine mounts made now by a reputable firm. The first mount I recieved the bolt holes on the dynafocal ring are over half a hole out and i can't get the bolts in. Also the cross tubes at the bottom hit the oil sump right in front of the oil suction screen. The second mount the dynafocal ring bolts line up but the ring hits the dip stick and the cross brace tubes at the bottom still hit the oil sump in front of the oil suction screen. It looks like I will have to make my own mount. I tried my friends Lycoming 0360 S1C mount and all tubes clear with room to spare but the bolt holes are again over half a hole out. My question is, are there different bolt hole patterns for these two engines? I know the dynafocal mount should be a type1 30 degrees.
Where is the best place to get a dynafocal ring to fit my engine?( preferably from someone who knows what they are talking about)
Where is the best place to get a dynafocal ring to fit my engine?( preferably from someone who knows what they are talking about)