• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Heater System

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Larry Lyons

Registered Users
Lifetime Supporter
Joined
Oct 1, 2012
Messages
5,620
Reaction score
2,024
Location
NW Illinois
I would like to ask some questions on the heater system. I have a dedicated heat muff off the right bank that is about 12" long. Will that provide enough heat for the cabin? I could, at great difficulty take the air discharged from the oil cooler and direct that in to the muff, then to the cabin. That would preheat the air a bit but it will require considerable work to make happen. I plan on just using ram air through the heat muff for now, hoping it will make enough heat to save all the extra work to do other wise.

L
 

Latest posts

Back
Top