• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.

Pitts landing gear and wing

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
May 4, 2022
Reaction score
Ontario Canada
I have one aluminum spring gear with axles, nuts, wheel pant brackets and sway plate. I also have two top wings, one Sparcraft that has never been on an airplane and one factory kit wing with ailerons (bottom wings were damaged in a ground loop).
I want $1500.USD+shipping for the gear,

$500USD+shipping for the Sparcraft wing

$700USD+shipping for the factory wing with ailerons


  • IMG_1529[1].JPG
    6.5 MB · Views: 0
  • IMG_1533[1].JPG
    2.7 MB · Views: 0
  • IMG_1535[1].JPG
    2.8 MB · Views: 0
  • IMG_1536[1].JPG
    3 MB · Views: 0

Latest posts