• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $29.95/year to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).

PS-5C Pressure Carb and Fuel Pump

hpapilot

Registered Users
Supporting Member
Joined
Jul 1, 2015
Messages
34
Reaction score
0
Bendix PS-5C pressure carb and matching (mid-pressure) fuel pump. Has the desirable red seals. These were in great working condition when removed from the O-360 on our S-1C for conversion to fuel injection. This setup allows fully inverted operation without fuel injection.

The dataplate is stamped "O-320" but it ran well on our 10:1 O-360.

$1500 OBO

Thanks for looking!

RJ

20190505_210758.jpg
20190505_210802.jpg
20190505_210805.jpg
20190505_210824.jpg
20190505_210830.jpg
20190505_210849.jpg
20190505_210854.jpg
 

ChuckandBev

Member
Supporting Member
Joined
Jul 8, 2018
Messages
11
Reaction score
0
Location
Chandler
I am interested in this for an o320. How long since it was removed? PM me or call 480-353-6966. Thank you, Chuck
 

hpapilot

Registered Users
Supporting Member
Joined
Jul 1, 2015
Messages
34
Reaction score
0
I am interested in this for an o320. How long since it was removed? PM me or call 480-353-6966. Thank you, Chuck
Hi Chuck, it's been off the airplane for about a year. I'll give you a call tomorrow. Thanks!

RJ
 

hpapilot

Registered Users
Supporting Member
Joined
Jul 1, 2015
Messages
34
Reaction score
0
Bump - this is still available. It's been stored well since it was removed. Make me an offer!

I also have the original wobble pump that I'll throw in if you need it!

RJ
 

gmatejcek

Well-Known Member
Supporting Member
Joined
May 3, 2018
Messages
225
Reaction score
80
Hi there-
Do you have a part number or other reference for the pump?
Thank you-
 

hpapilot

Registered Users
Supporting Member
Joined
Jul 1, 2015
Messages
34
Reaction score
0
Hi there-
Do you have a part number or other reference for the pump?
Thank you-
I believe the pump P/N is 40595, which is the "medium" pressure, laminated-arm model. They actually seem to be available rebuilt from Spruce as well.
 

Latest posts

Top