• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Radius plate upside down

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mciaglia

Well-Known Member
Joined
Jan 15, 2014
Messages
392
Reaction score
265
I was installing the outside air temperature probe for the MGL and putting it on the inside of the landing gear cuff. when reinstalling it I noticed that the landing gear radius plate was installed upside down. The lower longeron modification was performed but I am unsure about this

ImageUploadedByBiplane Forum1477851898.996444.jpg
 

Latest posts

Back
Top