- Joined
- May 22, 2012
- Messages
- 35
- Reaction score
- 5
My S1S panel has a couple gauges not working properly (man press and oil temp (bourdon tube) have failed) and I am also wanting to update a few things.
Since the upper covers will have to be removed its time to do the work.
I would like to add a CHT, move the ignition key/start to the left and use 2 toggles and button, with a prop change a new tach is needed too (might go with an EI tach)
It seems most Pitts have basic analog panels so I am hoping you guys will show me your for examples.
Thanks Greatly.
Here is mine as is. Comments and suggestions are more than welcome.
Since the upper covers will have to be removed its time to do the work.
I would like to add a CHT, move the ignition key/start to the left and use 2 toggles and button, with a prop change a new tach is needed too (might go with an EI tach)
It seems most Pitts have basic analog panels so I am hoping you guys will show me your for examples.
Thanks Greatly.
Here is mine as is. Comments and suggestions are more than welcome.
