- Joined
- Nov 9, 2011
- Messages
- 174
- Reaction score
- 15
Hi Folks
Working at dialing in the wing rigging on my Eagle.
To add a washer above or below the I strut, obviously you have to slide the bolt partially out and add a washer.
I took some of the washers and cut a slot in them, so I could just loosen up the bolt and slide it in. And then tighten the bolt back up.
There seems to be no way it could slide out, and is secured tight in the stack.
But wanted to hear thoughts or input.
thanks
Mark
Working at dialing in the wing rigging on my Eagle.
To add a washer above or below the I strut, obviously you have to slide the bolt partially out and add a washer.
I took some of the washers and cut a slot in them, so I could just loosen up the bolt and slide it in. And then tighten the bolt back up.
There seems to be no way it could slide out, and is secured tight in the stack.
But wanted to hear thoughts or input.
thanks
Mark