• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Starduster Too Acro Speeds

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 26, 2018
Messages
116
Reaction score
48
Location
Houston, Texas
I am about to put the airplane back into phase one to sign off the aerobatics. On the list is spins, rolls, loops and hammerheads. Does anyone have Recomended entry speeds for the loop and rolls? The manual I have on hand calls out 160-170 mph for the loop and 160 mph for the roll. These seem a bit high but what do I know. Thanks for the help in advance
 

Latest posts

Back
Top