• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



Thread sealants won’t cure

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Skippy

Registered Users
*
Joined
May 1, 2011
Messages
661
Reaction score
222
Location
Panhandle FL
All. Trying to seal a pair of an fittings into my oil cooler but it seems like all the thread seallants I use never cure. The part that squeezes out remains wet and tacky like syrup after days or weeks. I recently read permatex recommends a activator which I tried tonight so hoping for better results. What seallants have you all had good luck with ?
 

Attachments

  • 1E249F50-25D4-4D20-8A1B-10EB72D18DA7.jpeg
    1E249F50-25D4-4D20-8A1B-10EB72D18DA7.jpeg
    2.9 MB · Views: 0

Latest posts

Back
Top