nicko
Registered Users
- Joined
- Sep 3, 2011
- Messages
- 263
- Reaction score
- 12
What are you all using for trim tab wire? I know about the bowden cable available from spruce but, from my impression, the trim system uses a wire that goes through an aluminum tubing (where the trim tab cable comes out of the elevator on my airplane I actually see a little chunk of bowden cable sleeve sticking out but the sleeve is not visible on the cockpit/control end, just a wire coming out of an aluminum tube.)
My airplane uses the smaller trim tab on the right hand side of the elevator and the airframe is the short fuselage if that information makes a difference. I don't see any reference about what to use on the plans I have.
My airplane uses the smaller trim tab on the right hand side of the elevator and the airframe is the short fuselage if that information makes a difference. I don't see any reference about what to use on the plans I have.