• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.

Wing tips

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.


Well-Known Member
Nov 16, 2007
Reaction score
I've been dreading this part because I despise doing fiberglass work, but I'm about to this point so here goes. What I'm thinking is using that spray foam used for insulating doors and windows, expands after it applied, then sanding to shape and then laying up the fiberglass cloth and resine. Any reason why that won't work? I'm open for any suggestions aside from spending over 300 for two from Wag Aero.

Latest posts