raymoeller
Well-Known Member
- Joined
- Nov 11, 2011
- Messages
- 1,021
- Reaction score
- 428
Hey all,
I'm going to be attaching the skins of .025 2024 T3 for the fuselage with 8-32 pan head machine screws, and nut plates.
Not sure about the spacing that's optimum- security and strength vs. overkill and too much weight.
Was thinking that 4" screw spacing (center to center) would be the way to go.
Anyone with comments/experience care to share thoughts?
Thanks,
Ray
I'm going to be attaching the skins of .025 2024 T3 for the fuselage with 8-32 pan head machine screws, and nut plates.
Not sure about the spacing that's optimum- security and strength vs. overkill and too much weight.
Was thinking that 4" screw spacing (center to center) would be the way to go.
Anyone with comments/experience care to share thoughts?
Thanks,
Ray