davessn763
Well-Known Member
- Joined
- Sep 26, 2013
- Messages
- 89
- Reaction score
- 12
Today while I was fueling my Pitts S1-S, the plastic fuel filler hose I use broke off at the tip and the pieces were flushed into the tank. There is about about 1-2 square inches missing from the tip of the hose.
Is there a way to fish or flush out the debris or do I need to pull out the tank from the airplane and clean out the tank?
If I end up pulling the tank out I should probably change the flop too. Who supplies them?
Is there a way to fish or flush out the debris or do I need to pull out the tank from the airplane and clean out the tank?
If I end up pulling the tank out I should probably change the flop too. Who supplies them?
Last edited: