• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $29.95/year to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).

For Sale - Rag Wing RW-2 "Special" Pitts Wannabe

lake_harley

New Member
Joined
Jun 1, 2016
Messages
4
Reaction score
0
I have a pretty good start on a RW-2 "Special" which is the "replica" of a Pitts. I guess I just lost my enthusiasm for the project and perhaps even ultralights. This project was started and parts built with it being an ultralight in mind. All construction (gluing) was done with T-88 epoxy. Northern White Pine wood, and Birch and Mahogany aircraft plywood was used.

I'm only about 145# and 5'10", so I built planning on a 21" wide cockpit. To put that into perspective, the MiniMAX I built a few years ago is a 22" wide fuselage and it has ample room, even for the 175-ish# 6'2" pilot who test flew it.

Here's what I have built so far.

1) Ribs - 34 of them. 16 for the bottom wings and 18 for the top wings. Nose ribs also done and routed to proper shape. I'll include the rib jig board too.

2) Spars - All 8 of them for the top and bottom wings.

3) Fuselage Sides - Structure built and side plywood glued on. Bottom wing carry throughs are built but the fuselage sides have not yet been joined. It will be much easier to transport this way than if the fuselage construction had been completed to the canoe stage.

4) Plans and Manuals - 2 complete sets of printed 11" X 17" plans and assembly manuals. One set of plans is laminated that make a great set of "working plans" that won't get all tattered and torn through the building process.

5) Wood and Plywood - I have some wood already sawn to needed sizes (some long, some shorter pieces) and will include some nice Northern White Pine 1 X 6's that are 13' and 6' long. That should be about enough to cut the remaining material needed. There are also 3 - 4' X 4' pieces of .8MM ply (leading edge "D" cell wrap), an almost full 4' X 4' piece of 1.0MM ply, and an almost full 4' X 4' piece of 1.5MM ply. All of that plywood is Birch.

6) Rag Wing Newsletters - Referred to as "Chapter 1" it is 9 issues of news and building tips from the 1990's. Interesting reading and potentially very helpful!

7) Rag Wing Video - Video done by Roger Mann pointing out important details about the construction of a RW-2. I think I also have a video that shows some RW-2 flying footage.

I probably am forgetting a few things that I'd include, but those are the main items. I feel this is a unique collection of material and parts to get someone off to a good start on building the little RW-2. I talked with a gentleman in S.C who built and flew 2 or 3 of them. I believe plans are still available, but only on disc or e-mail files, so this set of printed "factory" plans is probably a bit unusual.


Price for everything I have that is RW-2 related is $550.00. You might (correctly) guess that is about the cost of the plans and materials alone....no allowance for the time involved to get the project up to this point. Because of physical size, shipping would be prohibitive. All of this would easily fit in a SUV, small station wagon or hatchback, or minivan. Delivery....well we could talk about that too for some reasonable cost. I have some other miscellaneous ultralight parts and pieces that I would also consider selling.

I think it's important to reveal my interest in selling. I have become rather frustrated with flying in general (or trying to), and have found a lot of pleasure in my Hot Rods and Motorcycles once again. Contact me if you'd like more information. I'd appreciate a phone call first. If I miss your call, please leave your name, a good time to call, and your phone number, and I will definitely return your call. We could probably cover a lot of questions you might have much more quickly with a phone call than by e-mail or PM. I'll try to get a few photos in the next few days.

Thanks for looking!

Lynn Winter
Uniontown, MO 63783 (about 1.5 Hr South of St Louis)
(573) 788-2574 Home
(573) 286-3335 Cell (I rarely carry it)
[email protected]
 
Last edited:

Jerry

Radial Skybolt Builder: 205% completed
Supporting Member
Joined
Aug 22, 2006
Messages
4,346
Reaction score
478
Location
South Jersey
Hey Lynn... where are located exactly? I’m not interested, but for those who are.
 

lake_harley

New Member
Joined
Jun 1, 2016
Messages
4
Reaction score
0
Jerry....Thanks for pointing out my omission. Location is Southeast Missouri...Uniontown, MO which is about 1.5 Hr South of St Louis. I've added that in an edit to my listing. Thanks

Lynn
 

Latest posts

Top