Ulf Petter Haugen
Member
This will be my first post here after i bought a Skybolt project in october 2018.
The project was started in the late 70's. And the fuselage was more or less finished.
The original builder had also started to built the wings, but as there was no documentation about the wood, glue etc, I elected to start from scratch.
I will have to do some minor modifications to the fuselage, and of course paint in a different color
The engine is an IO 540, with an MT two blade CS propeller.
(I would like to have a 3 blade prop, but I got a very good deal on the engine and prop)
The project was started in the late 70's. And the fuselage was more or less finished.
The original builder had also started to built the wings, but as there was no documentation about the wood, glue etc, I elected to start from scratch.
I will have to do some minor modifications to the fuselage, and of course paint in a different color
The engine is an IO 540, with an MT two blade CS propeller.
(I would like to have a 3 blade prop, but I got a very good deal on the engine and prop)
Last edited: