- Joined
- Mar 20, 2008
- Messages
- 200
- Reaction score
- 0
Ok. I rigged my Special last Fall and welded up the "N" struts in place. Removed them and painted them. Discovered that the port side is 3/8" Taller. So I have set it all back up, now that is cool enough, finally. The following measurements are ALL WITHIN 3/32":Tailpost to upper TE tip. Tailpost to lower TE tip. Landing wires. Flying wires. UPPER WINGS 0deg dihedral & AOA. LOWER WINGS 3deg dihedral & 3deg AOA. WHAT AM I MISSING? The only measurement that is not correct is the distance between the up and lower "N" strut attach points. Majorly confounded in Olivet, MI.