Since the threaded shaft of the eyebolt fracturing is the problem with the cabane strut ends, why not just weld the eyebolt into the cabane strut instead of reconfiguring the whole end? Would be much simpler for those of us who already have the cabane completed and the center section installed using the eyebolts?
-
The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.
SA750 Threaded clevis I bolt.
- Thread starter Hugh
- Start date
- Joined
- Jan 27, 2016
- Messages
- 1,724
- Reaction score
- 2,090
- Joined
- Oct 21, 2010
- Messages
- 82
- Reaction score
- 80
- Joined
- Jun 21, 2017
- Messages
- 333
- Reaction score
- 202
- Joined
- Oct 21, 2010
- Messages
- 82
- Reaction score
- 80
- Joined
- May 18, 2012
- Messages
- 4,260
- Reaction score
- 947
- Joined
- Jan 23, 2018
- Messages
- 46
- Reaction score
- 3
- Joined
- Nov 14, 2007
- Messages
- 3,401
- Reaction score
- 3,221
- Joined
- Jan 23, 2018
- Messages
- 46
- Reaction score
- 3
- Joined
- Jan 23, 2018
- Messages
- 46
- Reaction score
- 3
