- Joined
- Nov 9, 2011
- Messages
- 174
- Reaction score
- 15
Hi folks
I am double checking wing rigging on the Eagle and need to add or subtract some washers. The AN4 bolts that go through the wing and I strut are a very nice snug fit. I have to tap them a bit to get them out and back in. They seem fine and all the cad plating is still on them. ------ but a question ---- is there some type of preservative I should put on them or down the hole just for safety and wood preservation over the long term?
It all seems fine but thought I would ask.
thanks
mark
I am double checking wing rigging on the Eagle and need to add or subtract some washers. The AN4 bolts that go through the wing and I strut are a very nice snug fit. I have to tap them a bit to get them out and back in. They seem fine and all the cad plating is still on them. ------ but a question ---- is there some type of preservative I should put on them or down the hole just for safety and wood preservation over the long term?
It all seems fine but thought I would ask.
thanks
mark