A long time Starduster owner/builder, Oscar Bayer, had a weld break where the right axle attaches to the gear. This resulted in a ground loop. He has the lower wing rebuilt and covered but needs to find a fixture to hold the fuselage during the repairs to the landing gear attach fittings and some fuselage tubing. If there is such a fixture near Central California that can be borrowed or rented it would be must have appreciated. Oscar is 88 and we would like to get the airplane back together for him. Please email Barry Branin [email protected]. Thanks
-
The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.
Fuselage jig needed
- Thread starter flywaco
- Start date
Similar threads
