Currently getting ready to paint my 4 Skybolt ailerons and wondering how any of the members have done this. Theyre recovered and done through the third cross coat of poly spray and ready for the Ranthane. Planning to paint in an outside screened in booth. I am referring to the warning in the Stits Polyfiber manual on how the Ranthane fumes are harmful and emit cyanide. Would this be a problem with a 3M 7502 paint respirator (goggles etc.) with some breeze behind you through all the coats? The fresh air respirators are very pricey and again, I only have 4 ailerons to paint. Open to thoughts and or recommendations....
Thanks,
Stu.
Thanks,
Stu.