Is 1/4 inch reinforcing tape used exclusively on the 1/4 ribs...or does anyone alternate 1/4 inch and 3/8 inch tapes where the rib width varies (on the same rib)? It seems like matching the tape would be better from a fabric tearing perspective, but cosmetically maybe not worth it. I tried to carefully lay out a rib and it took five pieces of alternating 1/4 in. and 3/8 in. on one rib. Any thoughts?
-
The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.
Reinforcing tape width
- Thread starter 45TW
- Start date
christopher
Well-Known Member
- Joined
- Nov 7, 2010
- Messages
- 2,123
- Reaction score
- 244
- Joined
- Feb 27, 2011
- Messages
- 3,761
- Reaction score
- 1,644
Similar threads
Latest posts
-
-
-
-
-
-
-
AirVenture 2024 Beer-n-Food O'Clock, Thursday, July 25, 5pm- Latest: crusty old aviator
-
-
-
-
-
-
-
