• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).

Welding Flange for Tank

scottly

Well-Known Member
*
Joined
Sep 13, 2006
Messages
1,639
Reaction score
4
Here's my first attempt at making a 1/8" NPT flange to weld on my gas tank project.


I don't recommend this......took me a few hours to make something I could have bought for about $4. But, it was fun.... ;-)


I just need to cure the chatter when I cut out the recess, and I should have tapered the edge at the top....learn that on the next one.


20080507_182141_Picture_007.jpg
 

Latest posts

Top