• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $29.95/year to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).

  • If you have bought, sold or gained information from our Classifieds, please donate to Biplane Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

WTB - Continental Engine Cooling Eyebrows

smizo

Well-Known Member
Lifetime Supporter
Joined
Sep 7, 2009
Messages
7,303
Reaction score
4,954
As above, looking for a set of continental engine eyebrows. New would be great, but lightly used is fine. Not interested in any with cracks or patches, already have those ;)
 

kenamt

AcroKen
Joined
Dec 9, 2012
Messages
234
Reaction score
38
Sounds like a perfect project for using that black stuff you are so good using!!!!;)

Cub club has the patterns to make them,
 

smizo

Well-Known Member
Lifetime Supporter
Joined
Sep 7, 2009
Messages
7,303
Reaction score
4,954
Believe me, I thought of it. But that takes time away from putting the as2 together. For now I'm just gonna throw parts at the baby ace to keep it going.
 

maddog

maddog
Joined
Feb 19, 2013
Messages
146
Reaction score
34
Some time ago I saw a place that made them. [email protected] The phone number was (+420)602 779 356. Weird number but not used to Europe. Hope this helps.
 

Tomcat

Well-Known Member
Joined
Jun 13, 2008
Messages
1,358
Reaction score
483
Chris, we bought a set from Wag Aero for our clip wing, they are very good quality.
 

DLWilliams

Premium Member
Supporting Member
Lifetime Supporter
Joined
Aug 21, 2012
Messages
401
Reaction score
145
Sounds like we need to visit the flea market at SnF, what do ya think?
 

kenamt

AcroKen
Joined
Dec 9, 2012
Messages
234
Reaction score
38
Justin,

Great link - those really look nice!!!
 

cwilliamrose

‍‍‍‍‍‍‍‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ 
Lifetime Supporter
Joined
Nov 10, 2009
Messages
9,555
Reaction score
2,401
Location
SW Florida (94FL)
.....We just bought a set from these guys. http://www.ironagecompany.com/?attachment_id=573
Excellent quality and powder coated to boot.
I wonder if this is the guy I discussed squeezing rivets with years ago on a metal shaping forum? He was going to build eyebrows and wanted the rivets squeezed so they looked nice and consistent (in other words, perfect). I showed him photos of the custom squeezer yoke I made for riveting Waco flaps.
 

smizo

Well-Known Member
Lifetime Supporter
Joined
Sep 7, 2009
Messages
7,303
Reaction score
4,954
Score! Thanks Justin those look great and at a reasonable price. Dan, Jim and I went through the flea market last year, alot of...... Well...... Nevermind.
 

DLWilliams

Premium Member
Supporting Member
Lifetime Supporter
Joined
Aug 21, 2012
Messages
401
Reaction score
145
I know what you mean...a lot of...
But it IS fun looking through the piles of...stuff!
 

maddog

maddog
Joined
Feb 19, 2013
Messages
146
Reaction score
34
After looking at Iron Age company I think they look great.
 

Latest posts

Top