• The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome. In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web. We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction). Annual membership also comes with two BiplaneForum.com decals.



building IO540 - the process

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Nate

Preparation A thru G failed, now it's time for pre
*
Joined
Mar 16, 2016
Messages
491
Reaction score
38
The core I purchased was a first run engine. When sending out the parts for inspection/overhaul, can I expect the cylinders for example to be good? The compression was good around 72/75 for all cylinders.
 

Latest posts

Back
Top