• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

building IO540 - the process

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Nate

Preparation A thru G failed, now it's time for pre
*
Joined
Mar 16, 2016
Messages
491
Reaction score
38
The core I purchased was a first run engine. When sending out the parts for inspection/overhaul, can I expect the cylinders for example to be good? The compression was good around 72/75 for all cylinders.
 

Latest posts

Back
Top