I am currently trying to convert a stretched C to an S configuration by replacing the C wing, rudder, horizontal stabilizer, and elevators with components from a S model.
I've ran into a little problem at the horizontal stab-elevator area. The original C elevator was supported by two hinges on each elevator half, the S elevators are single hinge per side.
Are the S elevators connected by a carry through spar or/ tube orwhat?
Any advice, pictures or diagrams would be greatly appreciated.
Jim
I've ran into a little problem at the horizontal stab-elevator area. The original C elevator was supported by two hinges on each elevator half, the S elevators are single hinge per side.
Are the S elevators connected by a carry through spar or/ tube orwhat?
Any advice, pictures or diagrams would be greatly appreciated.
Jim