airbiker
Well-Known Member
- Joined
- Jun 22, 2008
- Messages
- 120
- Reaction score
- 1
I picked up some poster board today and got started laying out the new exhaust tunnel. I got far enough to see where things may get tricky.
I've gone through all the pictures and discussions I could find on the forum and I think I've got a plan I can pull off that will seal up pretty well and look decent. I may try to bend up some aluminum Sunday and see where the plan will collide with reality.
I also took a grinder with a cutoff wheel to the rest of the gear attach fittings, the old battery mount and the front former on the bottom. This had to be finished up to move ahead with the tunnel and new battery box.
There are some pictures here.
Thanks,
Ian
I've gone through all the pictures and discussions I could find on the forum and I think I've got a plan I can pull off that will seal up pretty well and look decent. I may try to bend up some aluminum Sunday and see where the plan will collide with reality.
I also took a grinder with a cutoff wheel to the rest of the gear attach fittings, the old battery mount and the front former on the bottom. This had to be finished up to move ahead with the tunnel and new battery box.
There are some pictures here.
Thanks,
Ian